Control units are used for operating motors in the event of a fire as well as daily building ventilation. It is possible to connect OSD rain sensor, ZRD rain sensor, RT 45 alarm buttons, LT 84U ventilation switch. The control unit works in monitoring mode on a daily basis and is supplied from 230V AC mains. In case of a fire, the rain sensor sends a signal to the control unit which, in turn, automatically sets in motion the window motors. Because of safety considerations, the control unit is equipped with an independent power backup which allows it to work in the monitoring mode for 72 h.
Technical parameters | RZN 4402-K | RZN 4404-K | RZN 4408-K |
power supply | 230V AC/50 Hz | 230V AC/50 Hz | 230V AC/50Hz |
output power | to 60W | to 120W | to 240W |
rated current | 2A | 4A | 8A |
output voltage | 24V DC 2 | 24V DC | 24V DC |
working temperature | (-5°C) do (40°C) | (-5°C) do (40°C) | (-5°C) do (40°C) |
dimensions | 250/250/91mm | 250/250/91mm | 341/341/91mm |
weight with batteries | 4,12 kg |
5,3 kg |
11 kg |
battery capacity | 2x12V/1,3Ah | 2x12V/2,1Ah | 2x12V/3,4Ah |
The switch is utilised in smoke ventilation systems. It is used for daily opening and closing windows equipped with actuators connected to the RZN 440_-K control unit. It is designed as a flat two-button switch mounted flush with the wall. The switch is available in white.
Technical specification | LP1 |
Dimensions | 80x80 mm |
Weight | 0.11 kg |
Used in smoke ventilation systems for daily opening and closing windows with installed motors connected to the RZN 440_-K control unit. It has been designed as a thin, underplaster switch with two buttons. Available in white.
Technical parameters | LT 84U |
working temperature | -10°C do +50°C |
dimensions | 80/80mm |
weight | 0,15kg |
Used for manual operating the smoke ventilation system in the event of fire. It is equipped with diodes signalising work mode or system malfunctions. It offers also a function allowing manual alarm cancellation.
Technical parameters |
RT 45 |
power supply | 24V DC |
alarm current | 20mA |
working temperature | (-10°C) do (50°C) |
dimensions | 129 x 138 x 39mm |
weight | 0,35kg |
It ensures automatic window closing in case of rain. It can co-operate with RZN 440_ - K control units. The sensor is heated, hence it is insensitive to such interference as mist, dew etc. It is installed in the open area of the roof, directly exposed to weather conditions. The signal from the sensor is accepted only when the control unit is monitoring. In the event of fire, signals from the sensor are ignored and have no effect on the window operating.
Technical parameters | ZRD |
power voltage | 8-32V DC |
dimensions | 55/50/15mm |
power cable | 3x0,25mm² (5mb) |
The OSD 23 optical smoke sensor is designed to detect visible smoke, emitted in the initial stages of fire when a material is smouldering, usually long before the appearance of an open flame and a noticeable increase in temperature. The sensor is intended to work in confined spaces where normally there is no smoke, dust or condensation. One sensor supports 40 m2 room.
Technical specification |
OSD 23 |
power voltage | 18-28V |
alarm current | 20mA |
working temperature | (-25°C) do (55°C) |
maximum relative humidity |
|
dimensions | ø115/54mm |
weight | 0,15kg |
power cable | 2x1mm² |
Film installation instructions
Product details:
Copyright © 2023 FAKRO. All rights reserved.