Flat light tunnel with rigid light transmitting tube SR_

Characteristic:

• RIGID LIGHT TRANSMITTING TUBE -  The light transmitting tube is made of aluminium and coated with a silver-based reflective layer with a reflectance of 98%. Depending on the model, the recommended maximum light tunnel length is up to 12 m. When installing the light transmitting tube, there is no need to cut to size the sections as the tube design is telescopic. Simply push one section deeper inside the other in order to attain the proper tube length.
• ROOFING ELEMENT -This consists of an aluminium frame into which 4mm thick toughened glass is bonded. The light transmitting tube is fitted to the inside profile of the frame. The roofing element is made of aluminium sheet metal or special organic glass (L – version with additional illumination of the loft) and is integrated with the flashing. Finished in RAL 7022, selected to coordinate with many common roofing colours.
• CEILING FRAME - The new ceiling frame is made of organic glass and is equipped with a built-in light diffusing element. The cover is manufactured of high-impact polystyrene in a white opaque colour. Ceiling elements of flat light tunnels are more rounded in comparison to light tunnels with a dome.
   
• ELBOW - The SRK elbow changes the angle of the light transmitting tube in the range of 0-45°. For the SR_ and SR_-L 550 light tunnel, the SRK elbow is only available as an option.