The SLS flashing is designed for use with roofing materials with a thickness of up to 10mm (2 layers, 5mm each, e.g. roofing paper, bituminous shingles and slate.
The SLZ flashing intended for high profile roofing materials with a profile depth of up to 45mm, e.g. tiles, profiled sheet metal.
The SLH flashing for roofing materials with a profile depth of up to 90mm: tile, high profile sheet metal.
The flat roof light tunnel system SLP i SFP is used where there is no possibility of using standard vertical or roof windows. The specially designed light tunnels consists of an insulation base SFP and SLP flashing. The base is made of galvanized steel and insulated with Styrofoam from the inside.
SLO light kit
The SLO light kit is used as an alternative source of light in the room after dark. Installed inside the light tunnel.
The SLM extension kit for flexible reflective tubing
The kit consists of: connecting ring, 120cm section of reflective tube, installation tape. It is possible to order other lengths of reflective tubing which are multiples of 30cm (e.g. 60cm, 90cm, 150cm).
Extension element for SRM rigid tubing
Extension element for SRM rigid tubing, 61cm in length.
The SRK elbow changes the angle of reflective tubing within the range of 0 – 65°. For SRT 550 light tunnel, it is available as an option.
The SLC suspender is used when the total length of flexible tubing is greater than 5m. Using the suspenders is to take some weight of the tubing to prevent any possible separation from the light tunnel flashing.
The SRC suspender is used when the total length of rigid tubing exceeds 4m. It takes some weight of the tube.